An igniter that clicks all night, a coil that glows on one side only, a glass top with a fresh crack: these are the calls we take every day. One call connects you with a licensed, insured independent cooktop pro around Steele.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
The technicians in our network are independent business owners who carry their own licensing and insurance. You are welcome to ask for proof at the door, and a good pro will not blink.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
We hear from people with forty-year-old coil ranges and from people with brand-new induction cooktops. Different machines, same goal: get the burners working and safe again, without paying for guesswork.
Tell the dispatcher the brand, whether it runs on natural gas, propane or electricity, and exactly which burner misbehaves. That short description helps the pro bring the right igniter, element or valve on the first trip.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
Constant clicking with the knob turned off often means a spill soaked the switch harness under the knobs. No spark at all on every burner points the pro toward the spark module or its power feed.
If the flame looks orange, ragged or jumps off the burner, something is off with air or gas delivery. The independent pro cleans the ports and orifice, confirms the cap sits flat, and measures manifold pressure against the spec on the tech sheet.
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
A crack in a smooth-top is more than cosmetic: spills can reach live elements underneath. The tech tests the radiant element and limiter, checks the hot-surface indicator, and quotes a new glass top if the old one is damaged.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
Bring these notes to the phone call. The pro confirms the cause with real tests before quoting a part.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
The process is short on purpose. You call, a local pro shows up, you see a quote, and the burner gets tested in front of you.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
A local pro heads your way with cooktop parts on board. The dispatcher tells you the arrival window before you hang up.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
The job ends with a real test: each burner on low, medium and high, plus a soap or electronic leak check on gas connections. Ask the pro to put the parts and labor warranty in writing.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Our dispatch line is answered day and night.
The igniter on our gas range would not quit clicking after a boil-over. The pro pulled the knobs, traced it to one wet switch under the panel, replaced it and tested every burner before he left.
A tenant called me about a coil burner that sparked when it was plugged in. The pro found the burner block had cooked itself, swapped the block and the element, and explained why both had to go together.
My induction cooktop kept flashing an error and shutting off in the middle of cooking. The tech checked my pans with a magnet first, which was fair, then found the cooling fan was jammed with grease. Cleaned and replaced the fan, and it has run fine since.
We moved into a house with propane and brought our natural gas range. The dispatcher found a pro who converted it the next morning, swapped every orifice, flipped the regulator and checked the flames burner by burner. He also put in the anti-tip bracket the old owners never installed.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
It is worth treating as a warning. Healthy burners show a firm blue flame. Yellow tips point to a dirty burner, a misaligned cap, or gas pressure that is off, and the technician can confirm it with a manometer.
Shut off power at the breaker for an electric range, or close the gas shutoff valve behind a gas range, then call us. A burner stuck on usually means a welded infinite switch, a stuck relay, or a valve that will not seat.
A crack lets liquid reach live parts, so the glass has to be replaced. The technician quotes the new top in writing, and most models allow the glass to be swapped without replacing the whole range.
Yes, in most cases. The conversion involves new orifices sized for propane, a regulator change, and low-flame adjustments on each valve. Ask the technician to leak-test every fitting when the job is done.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
Our referral line covers homes, condos, apartments and rental properties in Steele and the nearby neighborhoods and suburbs. The independent pros we connect you with drive to you, and most carry common igniters, coil elements and switches on the truck.
Landlords and property managers use the line too, since a dead burner in a rental becomes an urgent tenant call fast. Tell the dispatcher who will be home to let the technician in.
One call to our dispatch line connects you with a local stove pro.
